Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

10.06.2025 07:22

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Here is a simplified AC power diagram.

but this device (an Inductor) … impedes the rapid changes in the current.

There are two important concepts here.

How can I help my cat adjust to sleeping in its own room after allowing it to sleep with us as a kitten?

These are simplified answers to the original question, and does not change anything I wrote above.

It seems Mohan does not understand the difference between a comment and an Answer.

One is “what exactly is in a ‘surge protector’ ? ”

What do all Indian parents have in common?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

What does a fuse do?

At least they know the answer if they wanted it.

How can I get over a break up?

Upvotes:

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

What should I expect after a BBL surgery?

For this case there are devices called Metal oxide varistors (MOV).

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Why do we let ugly men exist?

nine

eight

It also is a device that limits the change in current flow.

Indiana Pacers assistant Lloyd Pierce taking lessons for next opportunity as head coach - Andscape

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Geopolitics Just Slapped the Oil Market Awake - Crude Oil Prices Today | OilPrice.com

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

He then describes Rainy Season and Lightning.

This one hit behind the barn.

Is the Shia claim true that Imam Ali was born inside the Kaaba?

Because the load is inductive, the current lags the voltage.(by a bit).

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

But… the neutral is now “floating” because of the 1 ohm resistance.

Why does my best friend call me ugly and act like she’s joking, but today she looked at me and said “I wouldn’t lie to you”? What should I say back to her?

At one ohm, the resistor has a maximum of 1 watt power.

What is lightning?

But it can get overloaded, and no longer works.

What would happen if the Soviet Union had simply annexed Manchuria after World War 2 or kept it independent as a puppet state allied them and separate from China as China was too weak too oppose it anyway?

In schematic diagrams this is the symbol for a fuse:

Can the fuse protect the electronic devices from lightning instead of a surge protector.

what exactly is a ‘surge’ protector?

Nostalgic Tunes Trigger Stronger Urge to Dance Than Familiar Hits - Neuroscience News

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

A fuse is a non-resetable over current circuit protector.

He then describes the function of a fuse.

Barnstars:

An AC voltage/ current source, and an ac inductive load.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

2024–10–14 [Omar Gharbi Omar Gharbi ]

2024–10–16 [ OO OLAOYE OYEBODE ]

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

2024–10–10[John johnson John Johnson ]

but I think this circuit , shows a few more pieces.

[image of Common-mode choke]

This is 'the assistant's answer'

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

The other is “what does a “fuse” do?”

He then asserts :

[old diagram got deleted by accident]

The third is lightning and “how it gets conducted into a home.”

This device then solves the entire problem.

I post the exact comment here.

Edit 2024–10.

So, the voltage could go up to 500 volts, and the fuse will not open up.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

The MOV will conduct when the voltage exceeds 50% of line voltage.

(Dc diagram shown, AC is similar).

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

This is where this question deviates from being a 'generic' question, and becomes more specific.

a photo is worth a thousand words.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

A circuit breaker is similar, but is resettable.

The bolt then partially travels down the line to your home.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

This is where the MOV conducts again, and dissipated the energy.

the problem then depends on "how fast does the fuse operate?".

Now when you have a certain ac resistance, then a current flows in a loop.

One

There are three different concepts here that are getting confused.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

so, what happens?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

These devices are installed between the “hot” and “neutral” and protective ground.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

First Sentence: